SnapToggle Toggle Bolts

SnapToggle Toggle Bolts
    HealthCraft
    In Stock
    $140.00
    Add to Cart

    SnapToggle Toggle Bolts from HealthyKin.com mount directly behind drywall, tile or other surfaces to provide adequate reinforcement to the wall.


     
    The SNAPTOGGLE® bolts gets their name from their speed and ease of use—they work in a SNAP!

     
    Ideal for Heavy Loads in Hollow Walls, Ceilings & Floors.
     
    SNAPTOGGLE® bolts pre-install without a bolt and can be installed with a screw gun. This allows one-person installations (instead of two), saving time and money. It's like having an extra pair of hands.

    Box of 50. Includes stainless steel mounting screws.

     
    SnapToggle Toggle Bolts Features:
    • Cost-effective - Turn a 2-person job into a 1-person job and get the job done faster. Save six minutes per anchor compared with old-fashioned methods.
    • SNAPTOGGLE® bolts always result in the lowest possible installation cost! Strongest toggle bolt in smallest hole
    • Convenient - Allow removal of bolt or fixture without anchor falling behind wall.
    • Most reliable - Will not damage or break through wall even when vibrated.
    • Easy to Use - Pre-install without bolt.
    • Accurate - Rugged pre-installation mechanism centers metal channel in small hole, before bolt insertion— and bolt won't sag.
    • Quick - Can be used with a screw gun—anchor won't spin in hole.
    SnapToggle Toggle Bolts Installation Instructions:
    (for demonstration purposes only - please refer to SNAPTOGGLE® bolt instructions for full instructions.

     
    Step 1
    Drill 1/2" (Ø13mm) hole. Hold metal channel flat alongside plastic straps and slide channel through hole. Minimum clearance behind wall: 1 7/8" (48mm).

     
     
     
     
    Step 2
    Hold ends of straps between thumb and forefinger and pull toward you until channel rests flush behind wall. Slide plastic cap along straps with other hand until flange of cap is flush with wall.

     
     
     
     
     
     
     
     
     
    Step 3
    Snap straps at wall by pushing side to side, snapping off straps level with flange of cap.

     
     
     
     
     
     
     
     
     
     
     
    Step 4
    Place item over flange. Insert bolt through item and tighten until flush against item, then stop.

    Note: Holding strength of all TOGGLER® BRAND anchors varies directly with the strength of the wall material, the screw size, and the extent of the screw engagement.
     
    Any recommended anchor is used at your own discretion and risk. Because of variations in screws and substrate materials beyond Mechanical Plastics Corp.'s control, it cannot guarantee the use of any anchor.

    Part numbers: HCP-STB

    Related Products

      Customer Reviews

      (0.00)
      # of Ratings: 0
      Rate It!
      Click Here to rate this product
      This product is new. CLICK HERE to be the first one to share your opinion!